non-relevant transparent gif
Digital SNMP & Modbus TCP sensor designed for monitoring 24×7 hydrogen levels from battery banks..

no pc required for the ServersCheck to operate once configured– measures hydrogen in the air between 0 to 25% LEL (lower explosive limit)
– resolution: 10ppm
– with a ±1% accuracy.
– precision of 1%.
– plugs into the base unit.
– powered by the base unit.
– 0U Rack or wall mountable sensor.
– alerts via SNMP Traps, email, SMS or voice calls..

The sensor connects to the base unit over a standard network cable. Max distance is 10m/30ft

The ENV-H2 sensor connects to the the base unit. This makes the device an ethernet hydrogen sensor. The sensor measures the hydrogen in the air. This sensor is designed to monitor conditions in server rooms and other sensitive area’s. Hydrogen reading is done through the external probe. Alerting via email, SMS, voice call. Integrates with BMS platforms using the Modbus TCP protocol. Or with NMS systems through SNMP GET and SNMP TRAPS.non-relevant transparent gif

Technical Specifications

Technical Specifications. – Hydrogen Probe (ENV-H2)
Hydrogen sensor small.
Operating temperature range: -40ºC to +50ºC (-40ºF to +120ºF).
Operating humidity range: 10 to 90% rH (non-condensating).
Pressure range: max 1100 HPa
Dimensions: 74 mm (2.9″) x 66 mm (2.59″) x 22 mm (0.8″).
Housing: Orange metal case with status led.
SensorGateway small The SensorGateway is required for this sensor.
Requires SensorGateway v5.1+ with firmware 7+

Network communication protocols: SNMPv2,v3 XML, JSON, HTTP and Modbus TCP
Base Unit Operating temperature range: 0ºC to +75ºC (32ºF to +167ºF)
Operating humidity range: < 90% rH (non-condensating).

RJ45 small Connects via regular straight RJ45 cable to the SensorGateway.
Maxmimum distance between probe and SensorGateway is 10m/33ft