Suncomm GSM/CDMA/3G/VOIP Gateway

GSM Gateway provides wireless connectivity between PSTN and GSM Network with high sensitivity to receive signal and transmit power to expand the coverage of GSM service. Available for 1-port, 2-ports, 4-ports and 8-ports.

Also available VoIP GSM Gateway to provide connectivity between SIP VoIP and GSM Network. Available for 1 SIM and 2 SIMs.

2 SIM GSM VoIP Terminal: SC-385-3G

Features:

  • VoIP(SIP),GSM conversion.(SC-385)
  • VoIP(SIP),CDMA conversion.(SC-385CDMA) – CDMA 2000(800/1900MHz)
  • VoIP(SIP),3G conversion.(SC-385-3G) for all world and Japan (SoftBank Mobile,Docomo)
  • SC-385-3G: mobile to lan 2 stage dialing-free mode. When calling party call SC-385-3G sim card,the calling party will hear dial tone and enter any destination number. **How to differentiate mobile to lan-2 stage dialing is available?** UMTS Mobile call UMTS Mobile: when the called party answer, the calling party press any DTMF. If the called party hear DTMF Voice,this feature is available;contrariwise**
  • 50 sets of LAN –> MOBILE routes setting,50 sets of MOBILE –> LAN routes setting. -Support one stage diaing *When lan phone and SC-385 both register SIP proxy Server or Asterisk or VoipBuster,you can dial any destination number from lan phone directly. *Please note,SIP proxy Server,Asterisk need to have the route of destination number. VoipBuster need to have credit. -Support assigned mode and free mode-two stage dialing
  • Voice response for setting and status(dial in from mobile).
  • For call termination (VoIP to GSM/CDMA/UMTS) and origination (GSM/CDMA/UMTS to VoIP).
  • Standard SIP(RFC2543,RFC3261) protocol,Communicates with other gateway or PC
  • Receive SMS and Send SMS (CDMA version,sms feature is unavailable)
  • Allows your program Send/receive SMS with AT Command
  • Call Back feature
  • All functions can be set on web.
  • Provide CDR

Specification:

  • Protocols:SIP (RFC2543,RFC3261)
  • TCP/IP:IP/TCP/UDP/RTP/RTCP/CMP/ARP/RARP/SNTP/DHCP/DNS Client,IEEE802.1P/Q,ToS/DiffServ,NAT Traversal,STUN,uPnP,IP Assignment,Static IP,DHCP,PPPoE
  • Codec:G.711 u-Law,G.711 a-Law,G.729A,G.729A/B
  • Voice Quality,VAD,CNG,AEC,LEC,Packet loss

Frequency:

  • Quad Band 850/900/1800/1900MHZ
  • 3G/UMTS for all world and Japan (SoftBank Mobile,Docomo)
  • 3G/UMTS Version 3G:EDGE/GPRS 850, 900, 1800, 1900 MHz / HSDPA/UMTS 850, 1900,2100 MHz
  • CDMA 2000(800MHZ/1900MHZ)

Please Note

  1. Most CDMA -2000 operators don’t offer Answer signal, so VoIP to Mobile, SC-385 will connect soon. CDMA -2000 operators will start billing soon. It doesn’t wait mobile side answer
  2. CDMA Version doesn’t support SMS Feature and 180/183 unavailable
  3. CDMA version doesn’t have remote SIM feature

4SIM GSM VOIP Terminal: SC-495 3G/GSM/CDMA VoIP Terminal

Overview:

  • 4 Ports GSM VoIP Terminal / CDMA VoIP Terminal / UMTS VoIP Terminal
  • SC-495 is a 4 Ports GSM/CDMA/UMTS VoIP Terminal for call termination (VoIP to GSM/CDMA/UMTS ) and origination (GSM/CDMA/UMTS to VoIP). Support
  • Asterisk,Trixbox,3CX,SIP Proxy Server,VoipBuster.

Features:

  • VoIP(SIP),GSM conversion.(SC-495)
  • VoIP(SIP),CDMA conversion.(SC-495C) – CDMA 2000(800/1900MHz)
  • VoIP(SIP),UMTS conversion.(SC-495U) for all world and Japan (SoftBank Mobile,Docomo)
  • SC-495U: mobile to lan 2 stage dialing-free mode. When calling party call SC-495U sim card,the calling party will hear dial tone and enter any destination number.
  • **How to differentiate mobile to lan-2 stage dialing is available?**
  • UMTS Mobile call UMTS Mobile: when the called party answer, the calling party press any DTMF.
  • If the called party hear DTMF Voice,this feature is available;contrariwise**
  • 50 sets of LAN –> MOBILE routes setting,50 sets of MOBILE –> LAN routes setting. -Support one stage diaing
  • *When lan phone and SC-495 both register SIP proxy Server or Asterisk or VoipBuster,you can dial any destination number from lan phone directly.
  • *Please note,SIP proxy Server,Asterisk need to have the route of destination number. VoipBuster need to have credit. -Support assigned mode and free mode-two stage dialing
  • Voice response for setting and status(dial in from mobile).
  • For call termination (VoIP to GSM/CDMA/UMTS) and origination (GSM/CDMA/UMTS to VoIP).
  • Standard SIP(RFC2543,RFC3261) protocol,Communicates with other gateway or PC
  • Receive SMS and Send SMS (CDMA version,sms feature is unavailable)
  • Allows your program Send/receive SMS with AT Command
  • Call Back feature
  • All functions can be set on web.
  • Provide CDR

Specifications

  • Protocols:SIP (RFC2543,RFC3261)
  • TCP/IP:IP/TCP/UDP/RTP/RTCP/CMP/ARP/RARP/SNTP/DHCP/DNS Client,IEEE802.1P/Q,ToS/DiffServ,NAT Traversal,STUN,uPnP,IP Assignment,Static IP,DHCP,PPPoE
  • Codec:G.711 u-Law,G.711 a-Law,G.729A,G.729A/B Voice Quality,VAD,CNG,AEC,LEC,Packet loss
  • Frequecny: Quad Band:850/900/1800/1900MHZ 3G/UMTS: for all world and Japan (SoftBank Mobile,Docomo) 3G:EDGE/GPRS / HSDPA/UMTS CDMA 2000(800MHZ/1900MHZ)**Please note**
  • 1. Most CDMA -2000 operators don’t offer Answer signal. So VoIP to Mobile, SC-495 will connect soon. CDMA -2000 operators will start billing soon. It doesn’t wait mobile side answer
  • 2. CDMA Version doesn’t support SMS Feature and 180/183 unavailable
  • 3. CDMA version doesn’t have remote SIM feature

8SIM GSM VoIP Terminal: SC-895 3G/GSM/CDMA VoIP Terminal

Overview:

  • 8 Ports GSM VoIP Terminal / CDMA VoIP Terminal / UMTS VoIP Terminal
  • SC-895 is a 8 Ports GSM/CDMA/UMTS VoIP Terminal for call termination (VoIP to GSM/CDMA/UMTS ) and origination (GSM/CDMA/UMTS to VoIP). Support
  • Asterisk,Trixbox,3CX,SIP Proxy Server,VoipBuster.

Features:

  • VoIP(SIP),GSM conversion.(SC-895)
  • VoIP(SIP),CDMA conversion.(SC-895C) – CDMA 2000(800/1900MHz)
  • VoIP(SIP),UMTS conversion.(SC-895U) for all world and Japan (SoftBank Mobile,Docomo)
  • SC-895U: mobile to lan 2 stage dialing-free mode. When calling party call SC-895U sim card,the calling party will hear dial tone and enter any destination number.
  • **How to differentiate mobile to lan-2 stage dialing is available?**
  • UMTS Mobile call UMTS Mobile: when the called party answer, the calling party press any DTMF.
  • If the called party hear DTMF Voice,this feature is available;contrariwise**
  • 50 sets of LAN –> MOBILE routes setting,50 sets of MOBILE –> LAN routes setting. -Support one stage diaing
  • *When lan phone and SC-895 both register SIP proxy Server or Asterisk or VoipBuster,you can dial any destination number from lan phone directly.
  • *Please note,SIP proxy Server,Asterisk need to have the route of destination number. VoipBuster need to have credit. -Support assigned mode and free mode-two stage dialing
  • Voice response for setting and status(dial in from mobile).
  • For call termination (VoIP to GSM/CDMA/UMTS) and origination (GSM/CDMA/UMTS to VoIP).
  • Standard SIP(RFC2543,RFC3261) protocol,Communicates with other gateway or PC
  • Receive SMS and Send SMS (CDMA version,sms feature is unavailable)
  • Allows your program Send/receive SMS with AT Command
  • Call Back feature
  • All functions can be set on web.
  • Provide CDR

Specifications

  • Protocols:SIP (RFC2543,RFC3261)
  • TCP/IP:IP/TCP/UDP/RTP/RTCP/CMP/ARP/RARP/SNTP/DHCP/DNS Client,IEEE802.1P/Q,ToS/DiffServ,NAT Traversal,STUN,uPnP,IP Assignment,Static IP,DHCP,PPPoE
  • Codec:G.711 u-Law,G.711 a-Law,G.729A,G.729A/B Voice Quality,VAD,CNG,AEC,LEC,Packet loss
  • Frequecny: Quad Band:850/900/1800/1900MHZ 3G/UMTS: for all world and Japan (SoftBank Mobile,Docomo) 3G:EDGE/GPRS / HSDPA/UMTS CDMA 2000(800MHZ/1900MHZ)**Please note**
  • 1. Most CDMA -2000 operators don’t offer Answer signal. So VoIP to Mobile, SC-895 will connect soon. CDMA -2000 operators will start billing soon. It doesn’t wait mobile side answer
  • 2. CDMA Version doesn’t support SMS Feature and 180/183 unavailable
  • 3. CDMA version doesn’t have remote SIM feature

16 SIM GSM VoIP Terminal SC-1695i with 1WAN, 1LAN, USSD, Open API for SMS, Auto hunting, quad band: SC-1695i

Overview:

SC-1695i GSM VoIP Terminal with 16 SIM, 1WAN, 1LAN is designed for call termination (VoIP – GSM) and origination (GSM – VoIP) use. It is compatible with Soft Switch, IP PBX or SIP Proxy servers.

Features:

  • Point to Point Protocol over Ethernet (PPPoE) Client Support
  • Built-in PPPoE client for establishing a DSL link connection with the ISP. There is no need to install a further PPPoE driver on computers.
  • Smart QoS
  • It provides smart QoS feature to provide stable voice quality while users access internet from private LAN to internet at the same time.
  • VoIP to GSM call termination: 16 concurrent calls, termination calls from VoIP to GSM network; Origination: GSM to VoIP
  • Maximum 16 concurrent calls for each unit, calls from GSM network over VoIP.
  • Flexible choice, worldwide GSM network usable.
  • SMS supported
  • SMS sending and receiving – provides open API interface for third party to develop their own business.
  • Management & maintenance
  • Remote SMS recharge, Hot plug SIM cards, SIM cards ’ PIN protection, easy for maintenance
  • Flexible number manipulation
  • Support 32 number manipulation rules, replace the call prefix and send calls to different ports and port groups
  • Route management
  • More than 2 Softswitch/ SIP server send calls to SC-1695i, white & black IP list management

Specifications

  • PHYSICAL INTERFACES
  • SIM Card Slot 16 GSM slot
  • Network Interface WAN and LAN, 10/100M Base-TX, RJ-45
  • SC-1695i with 1 LAN/1 WAN (3 LAN, 1 WAN will be new model’s design)
  • SIGNALLING & PROTOCOLS: SIP RFC3261 v2.0
  • Voice over Packet: VAD, CNG, DJB, PLC
  • Voice Codec: G.711 a-law/μ-law, G.723.1, G.729A/B, iLBC
  • IP Transport: TCP/UDP, ARP/RARP, NTP, DNS, TFTP, HTTP, TELNET, ICMP, STUN
  • Others: Static IP , PPPoE , DHCP, Client , NAT,STUN
  • GSM Frequency Range: GSM:850/900/1800/1900MHZ
  • Mobile Function: SMS Receive/send,Monitor the SIM Cards status via Web GUI,SMS API,USSD
  • Firmware Update: TFTP, FTP, WEB
  • Monitoring tools: Configuration & Monitoring via WEB, SSH, RS232
  • Backup & upload: Update & backup via http

Physical

  • Power: 12VDC, 2A
  • Environmental Operational: 32~104F / 0~40°C
  • Environmental Storage: -4~158F /-20~70°C
  • Environmental Humidity: 10%-90%,no-condensing
  • Weight: 7.5 Kg
  • Dimension (WxDxH): 1U for 19” rack mounting
More Info